Portable 45" Long Galvanized Steel Livestock Feed Trough

$79.99 Regular price $239.99

*As an Amazon Associate I earn from qualifying orders. This doesn't increase product cost to you.

View on Amazon

The Solution4Patio livestock trough is a galvanized steel feeding trough designed for goats, sheep, pigs, and similar livestock. It measures 20 x 11 x 45 inches with a 22-gallon capacity and a V-bottom design that discourages animals from standing inside it. 

Assembly uses pre-drilled holes with included hardware. This trough is designed for dry feed only and is not suitable for use as a water trough. Some units have sharp edges at the assembly points, so wearing gloves during setup and inspecting the interior edges before first use is recommended.

Specifications

  • Dimensions: 20 x 11 x 45 inches
  • Depth: 11 inches
  • Capacity: 22 gallons
  • Material: Galvanized steel, rust resistant
  • Bottom Design: V-bottom to discourage animals from standing inside
  • Opening Style: Inverted triangular for easier refilling
  • Assembly: Pre-drilled holes, included screws and nuts
  • Assembly Time: Under 5 minutes per manufacturer
  • Feeding Capacity: Approximately 10 sheep simultaneously
  • Water Use: Not designed to hold water
  • Suitable For: Goats, sheep, pigs, and similar livestock

Whether the Solution4Patio Trough Works for Your Barn or Pen Setup

If you feed goats, sheep, or pigs and want a metal trough with enough length for multiple animals to feed side by side, this unit covers that need at a manageable size and weight for a single person to move. 

The V-bottom is a practical feature for goat operations specifically, as it makes standing inside the trough less stable and reduces feed contamination from hooves. The 11-inch depth is accessible for adult animals across age ranges. The galvanized steel construction handles outdoor exposure without rusting, and the smooth interior rinses clean quickly. 

Before putting animals on the trough, run a hand along the interior edges, particularly near the end panels, and use edge trim or a file on any sharp spots, which can occur at the assembly joints.

What to Expect from the Solution4Patio Galvanized Steel Livestock Trough in Real Use

For goat operations, the trough performs well. Verified buyers report their goats rarely attempt to climb into it, and the weight and stability keep it in place during feeding without tipping. One buyer liked the design enough to order a second unit to spread their herd out at feeding time.

For pigs, the trough works for dry feed but pigs will attempt to climb it, which is a known behavioral tendency rather than a product issue. It cannot hold water, so it should not be used as a water source.

The one consistent caution from buyers involves edge sharpness at the assembly joints, particularly at the ends of the trough. At least one buyer added commercial edge trim to address this after assembly. 

Wearing gloves during setup and checking interior edges before first animal contact is a straightforward precaution. Assembly is straightforward and manageable for one person.

Real-world performance notes sourced in part from verified Amazon customer purchases.

Frequently Asked Questions

Can the Solution4Patio trough be used as a water trough as well as a feed trough?

No. This trough is designed for dry feed and is not built to hold water. The construction and sealing at the assembly joints are not intended to be watertight. For water access, a separate purpose-built water trough or tank is needed alongside this feeder.

How do you address sharp edges on the trough after assembly?

Some units have unfinished or insufficiently deburred edges at the end panels and assembly joints. Before animals have access to the trough, run a gloved hand along all interior edges to check for sharp points. 

A metal file smooths minor burrs quickly. For a more thorough solution, flexible rubber or plastic edge trim, available at most hardware stores, can be pressed over the rim edges to cover any sharp sections and protect both animals and handlers.

Does the V-bottom design actually prevent goats from standing inside the trough?

The V-shaped bottom makes the interior of the trough less stable for an animal trying to stand in it, which reduces how often goats climb in and contaminate the feed. It is not a complete deterrent for all animals, particularly younger or more determined goats, but verified buyers report their herds rarely get into the trough. 

The solid weight of the galvanized steel construction also makes it harder to tip than lighter plastic alternatives.