The Orbit 62056 single dial hose timer attaches to a standard outdoor faucet and turns your hose into a programmable watering system for gardens, lawns, potted plants, and drip lines. You set the start time, run duration, and frequency with one large dial, read everything on an LCD screen, and pause watering for 24, 48, or 72 hours with the rain delay. Settings stay saved when you swap batteries.
Homeowners and landscapers who want hands off watering from a single spigot or a lawn sprinkler will find it straightforward to set up. It schedules by interval, such as every few days, rather than by specific weekdays.
Specifications
-
Outlets: One
-
Connection: Standard outdoor hose faucet
-
Programming: Single dial for start time, duration, and frequency
-
Schedule Type: Interval based (every set number of days)
-
Display: Large LCD screen
-
Rain Delay: 24, 48, or 72 hours
-
Memory: Retains programmed settings during battery changes
-
Construction: Water resistant materials
Automated Watering From a Single Spigot for Gardens, Drip Lines, and Container Plants
If you water a vegetable bed, a row of containers, or a section of lawn from one outdoor faucet, this timer handles the schedule so you do not have to be there to turn the water on and off. It works with a sprinkler on the end of a hose run, or with drip lines and micro sprinklers feeding pots and raised beds.
Programming is done with one dial, so you can set it in a few minutes without paging through menus. The rain delay lets you skip watering after a storm without erasing your schedule. Because it runs on intervals rather than specific days, it fits best when you want to water every day or every few days and are not coordinating with other timers on a fixed weekly calendar.
What to Expect from the Orbit 62056 Single Dial Hose Timer in Real Use
Verified purchasers frequently describe it as easy to program, even for people who struggle with technology. Several have used the same model for years, including a gardener who reports about 10 years of service and another whose unit survived three winters left on the ground at well below freezing.
A micro sprinkler user saw a full year of daily outdoor use with no leaks. Plumber's tape on the faucet and hose threads helped another owner stop leaks entirely, and the display stays readable in bright sun.
There are a few caveats. Since it schedules by interval, a reviewer found that turning the dial past Off appears to reset the countdown. Water seeping in at the battery compartment ruined units for one drip irrigation user, and another had a unit fail after one season. The hard shutoff can also send pressure back toward frost free faucets. If you need weekday scheduling, consider a controller that schedules by weekday.
Real-world performance notes sourced in part from verified Amazon customer purchases.
Frequently Asked Questions
Can you leave a hose timer outside in winter?
It is best to remove your hose timer before temperatures drop below freezing. Water left inside the valve can freeze, expand, and crack the housing or damage internal parts. Disconnect the timer, drain it, take out the batteries, and store it indoors until spring. Reconnect and reprogram it once freezing nights are over.
Can a hose timer damage a frost free faucet?
It can. When a hose timer shuts off, the valve closes quickly, which can send a pressure surge back into the faucet. Over time, that repeated shock may stress a frost free faucet. Watch for drips or leaks at the faucet body, and if you see them, have the faucet checked. Keeping water pressure at a moderate level also reduces the strain.
How do you stop a hose timer from leaking?
Wrap the faucet threads and the timer's outlet threads with plumber's tape before connecting, and make sure the rubber washer is seated inside the coupling. Hand tighten the connection firmly without over torquing the plastic. Keep the battery compartment cover fully closed, since water getting in at the batteries can ruin the electronics.
