10 Mil White Plastic Sheeting, Heavy Duty Polyethylene Film

$129.99

*As an Amazon Associate I earn from qualifying orders. This doesn't increase product cost to you.

View on Amazon

Spirecover 10 Mil White Plastic Sheeting is a 10 ft x 100 ft polyethylene roll that covers 1,000 square feet as a crawl space vapor barrier, protective film, spray barrier, or painting shield. It is made from 100% new polyethylene with no recycled content, and it is odorless, reusable, and made to block steam and reduce radon gas.

The smooth white surface wipes clean. It suits contractors and property owners doing encapsulation or site protection with a crawl space moisture barrier in white poly film. Lay out your runs with overlap at every seam so the whole floor is covered.

Specifications

  • Brand: Spirecover
  • Material: 100% new polyethylene, no recycled content
  • Thickness: 10 mil
  • Color: White
  • Roll Size: 10 ft x 100 ft
  • Coverage: 1,000 square feet
  • Surface: Smooth and easy to clean
  • Properties: Odorless, reusable, moisture resistant
  • Barrier: Blocks steam and reduces radon gas
  • Listed Uses: Vapor barrier, protective film, spray barrier, painting shield

10 Mil White Vapor Barrier for Full Crawl Space Encapsulation

If you are covering a crawl space floor, running the liner up the foundation walls, and wrapping the support piers, this roll gives you 1,000 square feet of 10 mil film to work with. The 10 ft width lays down wide runs with few seams, and the white surface reflects your work light and leaves the space bright when you are done.

It also fits above ground jobs where you need a thick, cleanable sheet as a spray barrier or painting shield in a shop or barn. If your crawl space floor is rough or will see a lot of foot traffic after installation, a string reinforced liner adds tear resistance. For short term dust cover, lighter contractor film is enough.

What to Expect from the Spirecover 10 Mil White Plastic Sheeting in Real Use

Feedback from verified Amazon purchases describes the 10 mil sheet as thick, substantial, and durable, and as easy to cut and roll out. Crawl space users report it worked as hoped and left the space noticeably brighter. The line also comes in a 14 mil version.

A professional encapsulation contractor used that thicker sheet across a floor, up foundation walls, and around piers, and found it workable enough for a clean installation that held up while the crew moved across it.

Another 14 mil buyer measured the roll at 9 ft 9 in wide instead of 10 ft, which meant adjusting the overlap plan across a 39 ft span. Measure the width of your roll before you cut, and build in extra for seams. Compared with thinner poly sheeting, expect a heavier sheet that stays where you put it. See other specialty plastic films for related barrier materials.

Real-world performance notes sourced in part from verified Amazon customer purchases.

Frequently Asked Questions

Is 10 mil plastic thick enough for a crawl space vapor barrier?

Yes. This 10 mil polyethylene is made for crawl space encapsulation. It resists moisture, cuts easily, and rolls out across the floor, up the foundation walls, and around piers. If you want a heavier sheet for a floor that will get regular foot traffic, the same line is offered in a 14 mil thickness.

Does a crawl space vapor barrier help with radon?

This sheeting is made to block steam and reduce radon gas coming up from the ground. For it to work, cover the entire floor, overlap the seams, and seal the sheet at the walls and piers. A radon test after installation will tell you where your levels stand.

How much vapor barrier do you need for a crawl space?

Measure the floor area, then add the height you plan to run up the walls and the surface of each pier, plus extra for overlapped seams. One roll of this sheeting covers 1,000 square feet before overlaps. Measure the actual width of the roll before you plan your runs, since a sheet that is a few inches under 10 ft changes how many pieces you need across a wide span.