The Kaduocom electric cow milking machine is a corded electric milking unit designed for small dairy operations milking cows and goats. It operates at 40 to 46 pulsations per minute using a vacuum pulsation system and is available in 7L and 14L stainless steel bucket configurations.
The bucket lid includes a check valve that stops the machine automatically when full, and folding side handles make the bucket easier to carry and pour. Like most entry-level milking machines, it may not fully strip the udder, so hand finishing is a standard follow-up step for complete milk-out.
Specifications
-
Pulsation Rate: 40 to 46 pulsations per minute
-
Bucket Material: Stainless steel with food-grade milk container
-
Available Bucket Sizes: 7L and 14L
-
Bucket Features: Check valve for automatic stop when full, folding side handles for carrying and pouring
-
Hose and Liner Material: Food-grade silicone
-
Color-Coded Connections: Yes, for simplified assembly
-
Included Accessories: 2 cleaning brushes
-
Power Source: Electric (corded)
-
Compatible Animals: Cows and goats
-
Lid Requirement: Bucket lid must be fastened before operation for proper suction
Corded Electric Milking for Jersey Cows, Dairy Goats, and Small Mixed Herds
If you are managing a Jersey cow, a pair of dairy goats, or a small mixed herd and want to cut your milking time down from a long manual session to under ten minutes, this machine addresses that directly.
The color-coded hose connections reduce setup confusion, particularly for new machine milkers who have not worked with vacuum systems before. The 7L bucket suits single goat milkings and smaller cow sessions, while the 14L is the appropriate choice if your cow is in heavy production and you want to avoid stopping mid-milking to empty the bucket.
You will need barn electricity to run this unit, so it is not suited to off-grid or portable milking setups.
What to Expect from the Kaduocom Electric Cow Milking Machine in Real Use
Verified buyers have used this machine on Jersey cows, Alpine goats, Saanen goats, and mixed small herds, and the reduction in milking time is the most consistently reported benefit. One buyer completed milking two goats in under ten minutes, compared to a much longer hand milking session. Another buyer, who had never successfully hand milked a Jersey cow, found the machine workable from day one.
One consistent and normal characteristic to note: the machine does not fully strip the udder in most cases. Hand finishing after the machine cycle is standard practice with this type of milker, and buyers who calf-share or kid-share note it is a non-issue in that management system.
A practical tip from verified use: after the machine finishes and is turned off, pulling the green tube off the bucket before removing the teat cups releases suction on the cups and makes them come off the teats more cleanly.
The color-coded connections make assembly straightforward, and goats and cows have been described as relaxed during milking sessions.
Real-world performance notes sourced in part from verified Amazon customer purchases.
Frequently Asked Questions
Does the Kaduocom milking machine work for both cows and goats?
Yes. Verified use includes Jersey cows, Alpine goats, and Saanen goats. The same unit handles both animal types, with the teat cup and liner sizing appropriate for standard dairy cow and dairy goat teats.
If you manage both species, the machine transitions between them without separate configurations, though you should clean the unit thoroughly between uses on different animals.
How do you release the teat cups from the animal after milking is complete?
The standard approach is to turn the machine off after milking and then pull the green tube off the bucket before attempting to remove the teat cups.
This breaks the vacuum seal at the bucket rather than pulling directly on the cups, which allows the cups to release from the teats cleanly without resistance. Attempting to pull the cups off while suction is still active can cause discomfort to the animal.
Do you need to hand-strip after using this machine?
Most small-scale electric milking machines, including this one, do not fully empty the udder on their own. Hand stripping the remaining milk after the machine finishes its cycle is standard practice and should be expected as part of your milking routine.
For operations where the calf or kid is still nursing part of the time, the remaining milk left after machine milking is typically not a concern, as the young animal will take what is left.
