The Orbit 2-Zone All-in-One Automatic Watering System is a faucet-connected sprinkler kit that automates irrigation across two separate zones using six gear-drive rotor heads and a digital timer. It is designed for homeowners who want a step up from portable sprinklers without the cost or disruption of a full in-ground PVC system.
The Blu-Lock tubing connects without special tools, and the kit includes everything needed for a basic installation. Gear-drive rotors apply water more slowly than oscillating sprinklers, so deep watering cycles will take longer per session.
Specifications
-
Zones: 2
-
Sprinkler Heads: 6 gear-drive rotors
-
Tubing System: Patented Blu-Lock, tool-free push-fit connections
-
Connection Strength: 25% stronger than standard tubing connections per manufacturer
-
Timer: Digital, programmable
-
Water Source: Standard outdoor faucet
-
Includes: Timer, tubing, rotor heads, connectors, pressure gauge, cutter, and instructions
Whether the Orbit 2-Zone System Fits Your Yard Size and Setup Goals
If you are managing a small to medium lawn and want to eliminate manual watering without paying for a professionally installed in-ground system, this kit is designed for that situation. The two-zone configuration lets you split your yard into separate coverage areas and run each on its own schedule, which is useful when different sections of your property have different sun exposure or grass types.
The Blu-Lock fittings make it possible to lay tubing and connect heads without plumbing tools, but the installation still requires trenching to bury the supply line, so expect a half-day of physical work at minimum depending on your yard size and soil conditions.
If your water pressure is on the lower end, measure your PSI before planning your head spacing, as rotor performance and throw distance are directly affected by supply pressure.
What to Expect from the Orbit 2-Zone All-in-One Automatic Watering System in Real Use
Verified buyers consistently describe installation as manageable in a single day, with the Blu-Lock connectors noted as straightforward once you understand that the tubing needs to be pushed in further than it initially feels secure.
Several buyers emphasize that full seating of the tubing in the connector is important for preventing leaks, and a firm second push after initial insertion is the most commonly shared tip.
Trenching method matters. Using a half-moon edger to cut a path before opening a V-trench with a flat spade is noted as significantly faster than digging with a standard shovel, and renting a trencher is suggested for larger yards.
Rotor heads apply water slowly by design, which means cycle times need to be longer than what you might expect from a portable oscillating sprinkler. One buyer noted this as a minor adjustment to their watering schedule rather than a defect. At least one buyer reported that four heads running at once on high household water pressure worked without issue.
After installation, trench lines become nearly invisible within a few weeks as the lawn recovers.
Real-world performance notes sourced in part from verified Amazon customer purchases.
Frequently Asked Questions
How deep do you need to trench to install the Orbit 2-Zone system?
The tubing should be buried deep enough to protect it from foot traffic and mowing, typically a few inches below the surface. A narrow V-trench created with a flat spade or half-moon edger works well for this system.
The exact depth will depend on your soil type and local conditions, but the goal is to get the tubing below the surface while keeping the sprinkler heads at ground level so they can pop up freely during operation.
Do the Blu-Lock fittings require any special tools or glue to connect?
No. The Blu-Lock system is a push-fit design that requires no tools, adhesives, or clamps. You cut the tubing with the included cutter, push the end into the fitting until it seats fully, and the internal locking mechanism holds it in place.
The key step is ensuring the tubing is pushed in far enough to engage the lock. You will know it is properly seated when you cannot pull the tubing back out without pressing the release collar.
Can you add a smart timer to the Orbit 2-Zone system instead of using the included digital timer?
Yes. The system connects to your outdoor faucet through a standard hose thread, so any compatible hose-end timer, including smart timers with Wi-Fi or soil moisture sensing, can be substituted for the included digital timer.
Several buyers have upgraded to smart timers to automate adjustments based on weather or soil conditions. Confirm thread compatibility before purchasing a third-party timer.
