The Orbit 57946 B-hyve Smart 6-Station Wi-Fi Sprinkler Controller replaces a conventional timer on an in-ground irrigation system and lets you run, schedule, and adjust up to six zones from the B-hyve app. It adapts watering to weather conditions and plant needs, mounts indoors or outdoors, and keeps full programming available at the unit itself.
It fits homeowners and property managers who want remote control over their lawn and garden watering without giving up physical buttons. One thing to plan for: the controller connects over a 2.4 GHz Wi-Fi network, so check signal strength at the mounting spot.
Specifications
-
Stations: 6 independently controlled zones
-
Placement: Rated for indoor or outdoor mounting
-
Connectivity: Wi-Fi through the B-hyve app, with Bluetooth for local control when Wi-Fi is down
-
Onboard Controls: Display screen and buttons for full programming at the unit
-
Weather Scheduling: Adjusts schedules based on local weather forecasts and plant needs
-
Programs: 4 separate watering programs
-
Watering Restrictions: Schedule by specific days, odd or even days, or set intervals
-
Power Backup: Backup battery to retain settings during outages
-
Voice Control: Compatible with Amazon Alexa
-
Notifications: App alerts for zone start and finish, weather delays, and power loss
A Wi-Fi Upgrade for Existing Wired Sprinkler Systems Up to Six Zones
If you already have valves and wiring in the ground and your current controller is hard to program, this unit drops into the same wiring and gives you app control over every zone. You can run spray and rotor sprinkler zones on one schedule and drip lines for beds on another, set city watering restrictions so the system never runs on off days, and start any zone manually from your phone.
The six stations cover most residential systems with room to spare. If you are watering from a faucet with no buried valves, a hose-end timer is the right tool instead, since this controller needs wired zone valves to operate.
What to Expect from the Orbit B-hyve 6-Station Controller in Real Use
Swapping out an older controller is usually quick. Photograph and label the existing wires, move them over, and the physical install takes around half an hour, sometimes with a new mounting hole since the footprint differs from other brands. The included screwdriver is small, so most people use their own. App setup and zone programming typically take minutes, though a weak signal at an exterior wall may call for a Wi-Fi extender.
The app, remote manual runs, shared household access, notifications, and Alexa voice commands while working in the yard earn steady praise. Having both onboard buttons and the app is a frequent highlight, something many app-only controllers lack. The smart watering mode gets mixed feedback.
It asks for soil type, slope, and head details for every zone, and in at least one setup a zone stuck at full moisture refused to water, with support recommending manual schedules instead. Rain delays rely on forecasts unless you add a rain sensor. Locations without an outlet can be hardwired to a pump relay power source, though the manual does not cover that process.
Real-world performance notes sourced in part from verified Amazon customer purchases.
Frequently Asked Questions
Can I use the B-hyve controller to winterize my sprinkler system?
Yes. Once your compressor and hoses are connected to the system, open the B-hyve app, go to zones, and use the Zone Test function to turn each zone on and off as you blow out the lines. This lets you control the valves from your phone while you stay at the compressor, instead of walking back and forth to the controller.
Does the B-hyve sprinkler controller know if it actually rained?
Not on its own. Rain and wind delays are based on local weather forecasts, so the controller does not confirm whether rain actually fell at your property. To get on-site rain detection you need to add a separate rain sensor. You can also set a manual rain delay from the app whenever you know the ground is already wet.
How do I replace an old sprinkler timer with a B-hyve controller?
Before disconnecting anything, photograph the wiring in your old controller and label each wire by zone and common. Remove the old unit, mount the B-hyve, and move each wire to the matching terminal. The mounting holes may not line up with your previous controller, so be ready to drill a new hole. After powering it on, add the controller in the B-hyve app, connect it to your 2.4 GHz Wi-Fi network, and run a short manual test on each zone to confirm the wiring.